Table of Contents
Advertisement
Chapter 2 >> Connecting Your TV
Connecting to an Aerial or a Cable TV
To view the television channels correctly, a signal must be received by the
broadcasting provider.
Connect the RF coaxial cable from an aerial or a cable TV to the RF jack on
the rear of the TV.
2
Turn on the TV, and then press the AV button to select Digital TV or Analog
TV.
Notes:
. To receive an optimal signal, it is recommended that you use a 75 ohm IEC-
type coaxial cable.
2. For proper reception of signals, an external antenna is required. For best
reception, an outdoor antenna is recommended.
. To improve the picture quality in a poor signal area, please purchase a signal
amplifier and install properly.
When attaching the TV to the wall, use the
optional JVC wall mounting unit
-
Consult a qualified technician.
-
See the included manual on mounting procedures.
-
JVC assumes no responsibility for damage due to improper mounting.
-
200 mm x 200 mm mount which conforms to VESA standards.
or
Cable TV
English-
Advertisement
Table of Contents
