Cleaning The Screen - JVC LT-26D50 Instructions Manual

D.I.S.T. demonstration
To start the D.I.S.T. demonstration:
Press the H button to display the menu bar. Then press the yellow button.
A picture split in two (D.I.S.T. turned on and D.I.S.T. turned off) will appear on the screen.
To quit the D.I.S.T. demonstration:
Press the yellow button,
NOTE:
Due to static electricity, the TV may be covered with dust.
If this happens, wipe the TV with a soft cloth being careful not to scratch the TV.
Digital terrestrial broadcasting (DVB-T) service area
Although this TV can receive both Digital terrestrial broadcasting (DVB-T) and Analogue terrestrial
broadcasting, depending on the area in which you live, you may not be able to receive Digital
terrestrial broadcasting (DVB-T).
For details of the Digital terrestrial broadcasting (DVB-T) service area, refer to the FREEVIEW
website etc.

Cleaning the screen

The screen is coated with a special thin film to reduce reflection. If this film is damaged, uneven
colours, discolouration, scratches, and other problems that cannot be repaired may occur. Pay
attention to the following when handling the screen.
• Do not use glue or adhesive tape on the screen.
• Do not write on the screen.
• Do not allow the screen to come in contact with any hard objects.
• Do not allow condensation to form on the screen.
• Do not use alcohol, thinner, benzene or other solvents on the screen.
• Do not rub the screen hard.
TV/DTV button, p p buttons or any of the number buttons.
5