Setting The Transceiver - Kenwood UBZ-LJ9SETE Instruction Manual

4. Setting the transceiver

In order to make settings such as channel selection or QT/DQT code, this transceiver has a settings
menu. This menu is operated as follows:
• A long press on the <Function key up> switches to the first menu level. Each further long press
of the key advances one level.
• In the respective menu, the settings are made by briefly pressing the <Function key up> or
<Function key down> keys.
• Press the <PTT key> exits the settings menu and the transceiver is back in reception mode.
Note: If no buttons are pressed for 10 seconds, the settings menu is closed and the device is in
reception mode again.
Settings menu overview:
Level Function
Reception
0
mode
Channel
1
selection
Squelch
2
level
QT/DQT
3
code
4 VOX
Ringing
5
tone
6 Key tone
7 Roger beep
Feedback
8
Tone
Battery char-
9
ge level
Settings
CH01 - CH32
SQ 0 - SQ 9
OFF,
CT01 - CT38,
DT01 - DT83
V.of / 1/2/3
CA01 - CA20
KTOF / KTOn
RBOF / RBOn
FTOF / FTOn
3 / 2 / 1 / 0
Display
11