Remove From Storage - Cushman HAULER 1200X EFI 2019 Owner's Manual

M
AINTENANCE
1. Clean the vehicle. See VEHICLE CLEANING AND CARE on page 42.
2. Turn the key switch to the OFF position and put the direction selector in the NEUTRAL position.
3. Chock the wheels to prevent the vehicle from rolling. Do not engage the parking brake.
4. Perform all required routine maintenance indicated in the SCHEDULED MAINTENANCE CHART on page 38.
5. Fully inflate the tires. See Tire Pressure on page 43.
6. Add fuel stabilizer (4 oz. for a full tank of fuel) to the fuel and install the cap securely.
7. Remove the spark plug and pour approximately 1/2 oz. (15 ml) of SAE 10 - 30 weight oil or fogging oil into the
cylinder.
8. Rotate the crankshaft by hand several times, and reinstall the spark plug.

Remove from Storage

1. Change the oil.
2. Check the spark plug for tightness. Tighten if necessary.
3. Check all items in the daily pre-ride inspection. See PRE-RIDE INSPECTION on page 23.
4. Lubricate according to the SCHEDULED MAINTENANCE CHART on page 38.
56