Scheduled Maintenance Chart - Cushman HAULER 1200X EFI 2019 Owner's Manual

Table of Contents

Advertisement

M
AINTENANCE

SCHEDULED MAINTENANCE CHART

Perform all services at the maintenance interval reached first.
S – Indicates operations that need to be performed on vehicles subjected to severe use.
E – Indicates emission-related services (Failure to do this maintenance will not void the emissions warranty but may affect emissions).
D – Indicates services that must be performed by an authorized dealer.
Item
Steering
Front suspension
Rear suspension
CV boots
Tires
Wheel lug nuts
Accelerator
Brake system
Frame hardware
Fuel and engine oil level
Air filter
Headlights and taillights
Reverse warning alarm
Switches
Fluid leakages
CVT belt
Engine oil and filter
Starter/generator belt
Wheels
S
Air filter
E
S
Cooling fan
S
Engine oil
Starter/generator belt
S
Brake pads
Parking brake
Hydraulic brakes (if
equipped)
Controller
Wiring
Direction selector
Steering
S
Tie rods
Engine
Rear axle
38
Interval
(perform at interval
that comes first)
Hours
Calendar
Pre-ride
Check for smooth and free operation.
Pre-ride
Inspect. Check for leaks and loose or missing hardware.
Pre-ride
Inspect. Check for leaks and loose or missing hardware.
Pre-ride
Inspect. Replace as needed.
Pre-ride
Check condition and pressure.
Pre-ride
Check for loose or missing.
Pre-ride
Check for smooth operation.
Pre-ride
Check for proper operation.
Pre-ride
Check for loose or missing.
Pre-ride
Check for correct level.
Pre-ride
Inspect. Clean as needed.
Pre-ride
Check operation. Replace bulbs as needed.
Pre-ride
Check operation.
Pre-ride
Check operation.
Pre-ride
Inspect entire vehicle for leaks
Pre-ride
Check condition.
Initial Service
Replace oil and filter at first 50 hours of operation.
Initial Service
Check between first 15 and 20 hours.
Weekly
Check condition of rims, missing or loose lug nuts.
Weekly
Inspect. Clean as needed.
Check for build-up of dirt inside blower housing and fins; clean
Weekly
as necessary.
Weekly
Check level; add as necessary.
Weekly
Check condition.
10
Monthly
Inspect. Replace as needed.
20
Monthly
Conduct brake performance test; adjust as necessary
Monthly
Check brake fluid.
20
Monthly
Check operation of controller braking force.
20
Monthly
Inspect for loose connections, broken or missing insulation.
20
Monthly
Inspect attachment and mechanism; adjust as necessary.
20
Monthly
Check for excess play, loose or missing hardware.
20
Monthly
Check for excess play, bent rods, loose or missing hardware.
20
Monthly
Check for unusual noise, vibration, acceleration, oil leaks.
20
Monthly
Check for leakage; add oil as required.
Remarks
Page
13, 43
43
52
40
49
44
46
49

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents