Operation; Safety; Before Initial Use; Pre-Ride Inspection - Cushman HAULER 1200X EFI 2019 Owner's Manual

SAFETY

Failure to operate the vehicle correctly can result in a collision, loss of control, accident
or rollover, and cause serious injury or death. Follow all operation procedures in this
section of the manual. Read and comply with all safety warnings in the safety section of
this owner's manual.

BEFORE INITIAL USE

To prepare the new vehicle for operation, complete the following:
• Remove the protective plastic from the seats.
• Check for possible leaks that may have developed during shipment of the vehicle.
• Charge the battery.
• Fill the tank with the correct fuel.
• Perform the following pre-ride inspection.

PRE-RIDE INSPECTION

Inspect and verify that the vehicle is in safe operating condition before each use to decrease the risk of an accident.
Check the items in the table to help ensure safe and reliable operation.
Item
Brake system/pedal travel
Hydraulic brakes (if equipped)
Parking brake
Front suspension
Rear suspension
CV boots
Steering
Tires
Wheel hardware
Frame hardware
Fuel and engine oil
Fluid leakage
Switches
Reverse warning alarm
Air filter
Headlights
Brake light / taillights
Starter / generator belt

OPERATION

Check for proper operation.
Check for brake fluid level.
Ensure vehicle does not roll when the parking brake is engaged.
Inspect. Lubricate if necessary. Check for loose or missing hardware.
Inspect. Lubricate if necessary. Check for loose or missing hardware.
Inspect for damage. Replace if necessary.
Check for smooth and free operation.
Check condition and pressure.
Check for loose or missing hardware.
Check for loose or missing hardware.
Check for correct levels.
Inspect vehicle for leaks.
Check operation.
Check operation.
Inspect; clean or replace if necessary.
Check operation.
Check operation.
Check condition.
Check
O
PERATION
Page
52
42
40
49
44
44
48
23