Av Compu Link Remote Control System - JVC TH-V70 Instructions Manual

AV COMPU LINK remote control system

The AV COMPU LINK remote control system allows you to operate JVC TVs through the center
unit. To use this remote control system, follow the diagrams and procedure explained here.
• The AV COMPU LINK setting is performed in the OTHERS menu of the choice menus. See
page 62 for operations.
• Refer also to the manual supplied with your TV.
Connection and setup
Connecting a TV
1 Connect the center unit to a TV via the AV COMPU LINK jacks using the supplied AV COMPU
LINK cord.
TV
2 Set the AV COMPU LINK setting in the OTHERS menu as follows.
See page 62 to set the AV COMPU LINK setting.
• When connecting to the VIDEO-1 input jack of the TV:
Select "DVD2" (Initial setting).
• When connecting to the VIDEO-2 input jack of the TV:
Select "DVD3."
• "DVD1" is not in use.
Connecting a TV and VCR
• Refer also to the manual supplied with your VCR.
1 Connect the center unit to a TV and VCR via the AV COMPU LINK jacks using the AV COMPU
LINK cords.
• You need two AV COMPU LINK cords to make these connections. (Only one cord is supplied with this system.)
TV
VCR
67
AV COMPU LINK cord (supplied)
AV COMPULINK
AV COMPULINK
AV COMPU LINK cord
AV COMPULINK
AV
SOURCE
COMPU
LINK
AV
SOURCE
COMPU
LINK
VOL
Center unit
VOL
Center unit