Using The Cd Player - JVC FS-MD9000J Instructions Manual

5. Press the SET button.
"STORED" appears and, after 1 second, the display returns to
the broadcast frequency display.
6. Repeat above steps 1 to 5 for each station
you want to store in memory with a preset
number.
To cancel the presetting, press the CANCEL button in step
3 or 4.
To change the preset stations, repeat the same steps as
above.
Auto Presetting ——————————
In each band, you can automatically preset FM-30, AM-15 stations.
Preset numbers will be allocated as stations are found, starting from
the lowest station and moving up the frequency.
TUNER
BAND
1. Select a band by pressing the TUNER
BAND button.
2. Press the AUTO PRESET button on the
Remote Control for more than two sec-
onds.

Using the CD Player

REMOTE CONTROL RM-RXFSMD9000
DIMMER SLEEP POWER
CLOCK FM MODE TAPE/AUX
AHB. AUTO
SUPER PRO PRESET
PROGRAM RANDOM REPEAT
PROGRAM
BASS TREBLE CANCEL
EDIT DISPLAY
SET
/TITLE /CHARA
UP
< < >
SET
DOWN
TUNER
MD CD
BAND
4
VOLUME
You can use Normal, Random, Program or Repeat Play. Repeat
Play can repeat all the tracks or just one of the tracks on the CD.
Here are the basic things you need to know to play a CD and locate
the different tracks on it.
The Quickest Way To Start a CD Is With the One Touch
Operation
38
Press the CD button.
• The power is automatically turned on. If a CD is already
inserted, it will start playing from the first track.
• If no CD is inserted, "NO DISC" appears on the display and the
CD Player remains in Stop mode.
To Insert a CD
1. Press the CD 0 button on the Unit.
The CD holder opens.
AUTO
PRESET
(for 2 seconds)
REPEAT
RANDOM AHB. PRESET
SUPER PRO TUNING DOWN MULTI CONTROL
UP POWER
TAPE MD
/AUX
>
CD SYNCHRO REC
REC PAUSE
DOWN DOWN
38
CD
¢
7
When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
3. Repeat steps 1-2 for the other band.
If you want to change the preset stations, carry out the Manual
Presetting for the desired preset numbers.
CAUTION: If the System is unplugged or if a pow-
er failure occurs, the preset stations will be
erased after about 24 hours. If this happens, you
will need to preset the stations again.
To Change the FM
Reception Mode
When you are tuned in an FM broadcast, the "STEREO" indicator
lights up and you can hear stereo effects.
If an FM stereo broadcast is hard to receive or noisy, you can select
Monaural mode. Reception improves, but you lose any stereo effect.
Press the FM MODE button on the Remote Control so that
the "MONO" indicator lights up on the display.
STEREO
To restore the stereo effect, press the FM MODE button on the
Remote Control so that the "MONO" indicator goes off.
CD Holder
4
7
¢
TIMER/
SNOOZE
UP CLOCK
OPEN/CLOSE 0
CD
TUNER CD CD
BAND
EJECT
VOLUME
MD
UP 38
CD
Repeat indicator
Play mode indicator
Music calender
2. Place a CD, with its label side up as shown
below.
3. Press the CD 0 button again to close the
CD holder.
• To close the CD holder and play the CD, you can press the CD
button.
FM MODE
MONO
Track number, Playing time, Preset number
OVER indicator which lights up if the
number of tracks of the CD exceeds 20.
38
9