Table of Contents
Advertisement
4. Play the record source selected in step 2.
5. Press the MD 38 button to start recording.
The MD indicator blinks slowly and the selected source is re-
corded on the MD.
REC
PAUSE
or
(Track is increased by 1.)
6. Press the 7 button to stop recording.
The MD indicator stays lit and "UTOCwriting" appears on the
display, indicating that the recording is successfully completed.
Then, the MD stops.
•
If the MD becomes full before pressing the
recording will be terminated after indicating "UTOCwriting".
Checking the Remaining Time of
the MD ———————————————
You can see the recordable remaining time of the MD in Stop or Re-
cording mode.
Press the DISPLAY/CHARA button on the Remote Control,
the remaining time appears on the display.
Track marking ———————————
•
Whenever playback advances from one track to another during
digital recording, the track number at the MD side is automati-
cally incremented by 1.
•
Whenever no sound at the playback side continues for 3 or
more seconds during analog recording, the track number at the
MD side is automatically incremented by 1.
•
The track number at the MD side is automatically incremented
by 1 by pressing the SET button on the remote control at the
desirable location during analog recording. (tuner or the equip-
ment connected to the AUX-1.).
Using the MD Player (Editing)
In addition to its recording and play functions, the MD Player comes with editing functions. You can divide, join, move, or erase the recorded
tracks in the MD as required. Also, you can give a disc title to the MD and track titles to the tracks in the MD.
Dividing tracks (DIVIDE function)
This involves adding a track mark (see Note) at some point during
the track which is to be made into the start of an additional track so
that the original track is divided into two tracks.
Track No.
Track A Track B Track C Track D
DIVIDE
Track A Track B Track C Track D
Joining tracks (JOIN function)
This involves erasing a track mark and turning two adjoining tracks
into one track.
Track No.
Track A Track B Track C Track D
JOIN
Track A + Track B.
14
MD
(Source playback)
7
button, the
Track C Track D
CD Synchro Recording
Everything on the CD goes onto the MD in the order it is on the CD,
or according to the order you have set in the program. (See page 10
for programming the CD tracks.)
1. Insert an MD with its label side up.
2. Insert a CD. (See page 9.)
3. Press the CD 38 button and then press the
7 button to stop the CD.
4. Press the CD SYNCHRO REC button on the
Unit.
Digital recording from the CD to the MD starts.
•
The track number for the MD increases synchronous with the
track on the CD.
•
After the CD Player has played the entire CD or all the pro-
grammed tracks, "UTOCwriting" appears on the display, indi-
cating that the recording is successfully completed. Then, the
MD and the CD stops.
•
When the MD becomes full before the CD Player finishes play-
back, the MD stops after indicating "UTOCwriting".
One Track Recording ————————
1. Insert an MD with its label side up.
2. Play the track on the CD you wish to
record.
3. Press the CD SYNCHRO REC button on the
Unit.
The CD Player returns to the beginning of that track and the
track is recorded on the MD. After recording, the CD Player and
MD Player automatically stop.
Moving tracks (MOVE function)
Tracks can be moved around so that they are in the desired se-
quence.
Track No.
Track A Track B Track C Track D
MOVE
Track A Track C Track D Track B
Erasing tracks (ERASE function)
This enables unnecessary tracks. Narration, etc. to be erased speed-
ily. The erased parts do not remain as silences but are closed up by
the subsequent tracks.
Track No.
Erasing
Track A Track B. Track C
Track B
Track A Track C Track D
Track D
New tracks can
be recorded.
Advertisement
Table of Contents
