Climate Range - Miele K 31222 Ui Operating And Installation Instructions

This appliance should be installed in a
dry, well-ventilated room.
When deciding on the installation site,
please bear in mind that your
refrigeration appliance will use more
energy if installed near to a heater, a
cooker or other appliance that gives
off heat. Avoid direct sunlight.
The higher the ambient temperature,
the longer the compressor runs and
the higher the energy consumption is.
When installing the refrigeration
appliance, please note the following:
- The socket must be easily accessible
in an emergency, not concealed
behind the appliance.
- The plug and mains connection cable
must not touch the rear of the
refrigeration appliance as they could
be damaged by vibrations from the
appliance.
- Do not plug in other appliances
behind the refrigeration appliance.
- WARNING: When positioning the
appliance, ensure the mains
connection cable is not trapped or
damaged.
- WARNING: Do not position or
operate multi-socket adapters,
distributor strips or other electronic
devices (such as halogen
transformers) at the rear of the
appliance.

Climate range

This refrigeration appliance is designed
for use within specific ambient
temperatures (climate range). Do not
use in ambient temperatures for which it
is not designed. The climate range is
stated on the data plate in the interior
cabinet of the refrigeration appliance.
Climate range
SN
N
ST
T
A lower ambient temperature leads to
the compressor switching off for longer
periods. This can cause the internal
temperature in the refrigeration
appliance to rise with the risk of food
deteriorating and going off.
Installation
Ambient
temperature
+10 to +32 °C
+16 to +32 °C
+16 to +38 °C
+16 to +43 °C
47