Exhaust Hose Installation - Black & Decker BPT10WTB Instruction Manual

SET UP & USE

EXHAUST HOSE INSTALLATION

The air exhaust hose and hose inlet must be installed or removed from the portable
air conditioner in accordance with the way it is being used:
COOL, AUTO, DEHUMIDIFY, HEAT (Heat model BPT10HWTB only):
Air exhaust hose and hose inlet should be connected to the portable air conditioner.
FAN: Air exhaust hose and hose inlet should be disconnected from the portable air
conditioner.
1. Align Arrow of hose inlet and hose.
Turn either clockwise or counterclockwise
to secure (Fig. 1).
2. Align arrow of hose outlet and hose.
Turn either clockwise or counterclockwise
to secure (Fig. 2).
3. Attach the hose inlet onto the back of the unit. Align the hose inlet with the slots
over the air exhaust housing and slide down. (Fig. 3).
4. Affix the hose outlet into the window slider kit and seal (Fig. 4 & 5).
.
Window slider
NOTE: The exhaust hose can be compressed or extended
moderately, but it is desirable to keep the length to a
minimum. Also make sure that the hose does not
have any sharp bends.
Page 14
Fig. 4
Fig. 1
Fig. 3
Fig. 5
Window slider
Fig. 2
Hook