Black & Decker BPT10WTB Instruction Manual page 17

SET UP & USE
SMART MODE
Press the button repeatedly until
the LED screen indicates the below.
Press the FAN Speed button
select HIGH, MED, LOW or AUTO fan
speed.
FOR COOL ONLY MODELS
• The air conditioner will automatically
operate in FAN mode when the room
temperature is below 73˚F (23˚C).
• It will operate in COOL mode when
the room temperature is above 73˚F
(23˚C).
FOR COOL AND HEAT MODELS
• The air conditioner will automatically
operate in HEAT mode when the
room temperature is below 68˚F
(20˚C).
• It will operate in FAN mode when
the room temperature is from 68˚F
(20˚C) to 73˚F (23˚C).
• It will operate in COOL mode when
the room temperature is above 73˚F
(23˚C).
TIMER BUTTON
PROGRAMMING SHUT DOWN
Press the TIMER button when the unit
is ON to select an auto STOP Time.
Continue to press TIMER repeatedly
to scroll through the time selections
of 1-24 hours. Once you have reached
to
the time you would like to select,
wait about 5 seconds and the timer
symbol will appear on the LCD screen
indicating that the timer is active and
the unit will STOP in the selected
amount of hours.
PROGRAMMING START-UP
In Cooling Mode with the fan speed
selected turn the air conditioner OFF.
Continue to press TIMER repeatedly
to scroll through the time selections
of 1-24 hours. Once you have reached
the time you would like to select,
wait about 5 seconds and the timer
symbol will appear on the LCD screen
indicating that the timer is active and
the unit will START in the selected
amount of hours.
Page 17