Troubleshooting - Geberit DGWC-03-C Operation Manual

EN

Troubleshooting

Malfunction
Water is running continuously
into the WC ceramic
appliance.
WC ceramic appliance is not
being flushed out properly.
Interval flush cannot be
triggered.
1)
The state of battery charge can be checked using a Geberit app.
14
Cause
Software fault
Technical fault
Flush volumes set incorrectly ▶ Contact a skilled person.
WC ceramic appliance
blocked with limescale
Software fault
Power failure
1)
Batteries flat
Technical fault
Rectification
▶ Interrupt the power supply
(mains fuse) for
10 seconds.
▶ Contact a skilled person.
▶ Descale the WC ceramic
appliance.
▶ Interrupt the power supply
(mains fuse) for
10 seconds.
▶ Check the power supply
(mains fuse).
▶ Replace the lifting device
batteries. → See
"Replacing the batteries",
page 15.
▶ Contact a skilled person.
9867118987 © 02-2022
970.773.00.0(00)