HY2189 Assembly
!
WARNING : Ensure the Battery is fully charged before assembly (Page 17).
Push the Blower Pipe (C) over the end of the Main Body (A), it will
1.
be secured with an affirmative *click!* noise.
NOTE – To remove the Blower Pipe (C), press in the clip and pull away
from Main Body (A).
Slide the Battery (D) into place with the Battery Release Button (F)
2.
facing away from the Main Body (A). It will be secured with an
affirmative *click!*
NOTE – To remove the battery, press the Battery Release Button(F) whilst
pulling away from the machine.
Assembly
Blower Pipe release clip
www.hyundaipowerproducts.co.uk
16