Battery Charger; Operation - Hyundai HY2189 Instruction Manual

Battery Charger Operation
!
Ensure the power source switch is OFF when plugging in Battery Charger
!
You MUST understand the whole Instruction Manual before any operation
Slide the Battery (D) into the Battery Charger (G), by lining up the
1.
terminals on both. It will be secured with an affirmative *click!*.
NOTE – To remove the battery, press the Battery Release Button(F) whilst
pulling away from the Battery Charger (G).
Plug the Battery Charger (D), then turn on the power source.
2.
3. The Charge State Lights will indicate the following:
Solid Green & Flashing Red: Charging
Solid Green & Solid Red: Fully charged
Flashing Green: Thermal protection activated, this is
when the battery is either too hot or too cold to be
charged. The charger will commence charging when
the battery has reached the correct temperature.
Flashing Red: Defective battery or charger
Charge State
Lights

Operation

www.hyundaipowerproducts.co.uk
17