Assembly - Hyundai HYBV3000E Manual

3. ASSEMBLY

WARNING
ALWAYS ensure the machine is turned off and unplugged before assembly or
emptying the collection bag.
Press the button （ pic.2 ） (2-1) and slide the air duct in and out （ pic.2 ） (2-2), the air
3.0
duct can be adjusted based on user height, adjust the height up to 300mm maximum to
30mm minimum in height （ pic.3 ）.
FITTING THE DEBRIS COLLECTION BAG
Before fitting the debris collection bag ensure that the vacuum/blow selector lever
3.1
operates smoothly and not obstructed by debris from the previous use.
When installing the collection bag turn the support （ Pic.4 ） (4.1) frame into the correct
3.2 position （ Pic.4 ） (4.3) and make sure the support （ Pic.4 ） (4.2) lock is in place.
When dismantling the collection bag: press the support lock （ Pic.5 ） (5.1) to release, if
the support lock has already been released, you must carry the collection bag's weight
3.3
alone.
ATTENTION: always ensure vacuum/blower is switch off before fitting or removing the
debris collection bag.
8