Napoleon GDI3N-1 Installation Manual page 18

fi nishing
EN
Pilot Shield Notch
1. Place log #1 snug against the back wall,
PLACE TEXT BOX HERE.
ensuring the notch fi ts around the pilot shield.
NOTE: ENSURE NOMENCLATURE IS
CONSISTENT THROUGHOUT.
3
3. Place the two holes in log #2 on B1 and B2.
PLACE TEXT BOX HERE.
Do not cover any burner ports.
NOTE: ENSURE NOMENCLATURE IS
CONSISTENT THROUGHOUT.
4
5. Place log #5 on the right-side notch of log #1
PLACE TEXT BOX HERE.
and the two notches of log #2.
NOTE: ENSURE NOMENCLATURE IS
CONSISTENT THROUGHOUT.
18
W415-4083 / 03.31.22
1
2
1
B1 B2
Notch
5
1 1
2
Notches
3
A1 A2
2. Place the two holes in log #3 on A1 and A2. Do
PLACE TEXT BOX HERE.
not cover any burner ports.
NOTE: ENSURE NOMENCLATURE IS
CONSISTENT THROUGHOUT.
Notch
4
3
Notches
4. Place log #4 on the left-side notch of log #1
PLACE TEXT BOX HERE.
and the two notches of log #3.
NOTE: ENSURE NOMENCLATURE IS
CONSISTENT THROUGHOUT.
4
6
6. Place log #6 along the left side of the lower
PLACE TEXT BOX HERE.
media tray.
NOTE: ENSURE NOMENCLATURE IS
CONSISTENT THROUGHOUT.
1
1
2
1
5
2