Levelling The Appliance - Napoleon GDI3N-1 Installation Manual

installation planning
EN
2.2

levelling the appliance

Have an authorized dealer install the appliance. If you install the appliance yourself, have your dealer review your
installation plans and/or installation. Draw out a detailed plan of the installation including dimensions and verify the
dimensions with the requirements listed in this manual.
You may wish to adjust the appliance position slightly to ensure the vent does not intersect with a framing
member. Appliance must be positioned so that no combustibles are within, or can swing within (e.g. drapes,
doors), 48" (121.9cm) of the front of the appliance.
Inserts only: This appliance is equipped with 4 levelling legs. Level the appliance before installing into the fi nal po-
sition, as levelling will eliminate rocking or excessive noise when the fan is in operation. Once the appliance is level,
move it partially into place to allow for all connections to be made. It is not practical to level the appliance once it
has been installed. Determine the required depth prior to installing the appliance and adjust the levelling screws
accordingly.
12
W415-4083 / 03.31.22