Radio Operations; Listening To The Radio - JVC KS-F545 Instructions Manual

RADIO OPERATIONS

Listening to the radio

You can use either automatic searching or manual
searching to tune in to a particular station.
Searching a station automatically:
Auto search
1
Select the band (FM1 – 3, AM).
Selected
band appears.
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
2
Start searching a station.
Press 4
stations of lower frequencies.
When a station is received, searching stops.
6
MO
FM1 FM2
AM
Lights up when receiving an
FM stereo broadcast with
sufficient signal strength.
Press ¢
to search
stations of higher
frequencies.
to search
RPT
To stop searching before a station is received,
press the same button you have pressed for
searching.
Note:
FM1 and FM2 : 87.5 MHz – 108.0 MHz
FM3 : 65.00 MHz – 74.00 MHz
Searching a station manually:
Manual search
1
Select the band (FM1 – 3, AM).
FM3
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
2
Press and hold ¢
until "M (manual)" starts flashing on
the display.
Selected band appears.
MODE SCM
FM1 FM2
AM
or 4
FM3