Finding The Beginning Of A Tune - JVC KS-F545 Instructions Manual

Cassette receiver
Hide thumbs Also See for KS-F545:
Table of Contents

Advertisement

Prohibiting cassette ejection
You can prohibit cassette ejection and can "lock"
a cassette in the cassette compartment.
While holding TAPE 23, press 0 (eject) for more
than 2 seconds. "NO EJECT" flashes on the
display for about 5 seconds, and the cassette
is "locked."
To cancel the prohibition and "unlock" the
cassette, While holding TAPE 23, press 0
(eject) for more than 2 seconds again. "EJECT
OK" flashes for about 5 seconds, and this time
the cassette is "unlocked."
Note:
If you press 0 while cassette ejection is prohibited,
the cassette will not be ejected.
10

Finding the beginning of a tune

Multi Music Scan allows you to automatically start
playback from the beginning of a specified tune.
You can specify up to 9 tunes ahead of or before
the current tune.
During playback
Specify how many tunes ahead of or
before the current tune the one you want
is located.
Press ¢
ahead of the current tune on
the cassette.
Press 4
before the current tune on the
cassette.
Each time you press the buttons, the number
changes up to ±9.
When the beginning of the specified tune is
located, playback starts automatically.
Notes:
• While locating a specified tune:
– If the tape is rewound to its beginning, playback
starts from the beginning of that side.
– If the tape is fast-forwarded to the end, it is
reversed and played from the beginning of the
other side.
• In the following cases, the Multi Music Scan
function may not operate correctly:
– Tapes with tunes having long pianissimo passages
(very quiet parts) or non-recorded portions between
tunes.
– Tapes with short non-recorded sections.
– Tapes with high level of noise or humming between
tunes.
to locate a tune
to locate a tune

Advertisement

Table of Contents
loading

Table of Contents