Complete Manual for the OneLINK Bridge Express AV Interface
Connections for HDBaseT Cameras Used with Codecs
A codec may be connected to the OneLINK device via RS-232 or over the IP network, depending on the
codec.
If an IP stream is available from the camera, the OneLINK device passes it to the network. Ethernet pass-
through is limited to 100 Mb/s. HDMI output resolution and streaming parameters (including resolution)
are configured on the camera, not the OneLINK device.
Connecting a Vaddio HDBaseT Camera and Polycom Codec
These diagrams show a OneLINK Bridge AV interface with a RoboSHOT HDBT camera. The OneLINK
Bridge Express connects in the same way. Other Vaddio HDBaseT cameras connect in the same way.
The Polycom RealPresence Group 500 codec is similar to the RealPresence Group 310 codec, and
connects to the OneLINK device in the same way.
RoboSHOT HDBT Camera and Polycom RealPresence Group 310 Codec
6