Serial Control Settings; Accessing The Connected Camera's Web Interface - LEGRAND VADDIO OneLINK Bridge Express Manual

Complete Manual for the OneLINK Bridge Express AV Interface

Serial Control Settings

Enhanced VISCA Mode – Enabled by default; provides enhanced support for some capabilities in
HDBaseT cameras.
Baud Rate – If the installation includes devices that use RS-232 communication, set them all to use the
same baud rate.

Accessing the Connected Camera's Web Interface

The Pairing page provides a link to the connected HDBaseT camera's web interface. You can also
access the camera's web interface using the Vaddio Deployment Tool or a Vaddio Device Controller (if
the room includes one).
19