Table of Contents
Advertisement
Performance and Behavior Settings
Performance and behavior settings are on these pages of the web interface:
Streaming – USB streaming settings
n
Audio – Audio adjustments; phantom power to connected microphones; audio matrix
n
The screen shots in this chapter are from the OneLINK Bridge, and may differ somewhat from the web
interface that you see.
Configuring USB Streaming Settings
S
TREAMING PAGE
The camera's settings are used for IP streaming; the OneLINK device passes the IP stream from the
camera and does not require additional IP streaming configuration.
For non-USB cameras, the OneLINK device provides USB streaming capability.
These settings affect how the camera works with soft conferencing applications.
Enable USB Streaming – The OneLINK device can originate a USB stream only when this is
n
selected.
n
USB Device Name – Specify how the camera shows up in your soft client's camera selection list.
HID Audio Controls – Enable to allow conferencing applications to control the audio.
n
Enable UVC Extensions – Allow conferencing applications to control the camera.
n
Note
When HID Audio Controls are enabled, the conferencing application manages the volume automatically.
If necessary, you can disable HID Audio Controls to control volume manually.
Complete Manual for the OneLINK Bridge Express AV Interface
20
Advertisement
Table of Contents
