Web Interface; Working With The Connected Camera; Compatible Web Browsers - LEGRAND VADDIO OneLINK Bridge Express Manual

Web Interface

The OneLINK device provides a web interface to allow configuration and administration using a browser.
The web interface allows you to:
Set idle session behavior and passwords
n
n Manage streaming settings
n Add identifying information to the web interface
Back up, reboot, reset, or update the device
n
View information about the camera connection
n
View network-related information
n
View information about the device's firmware and current settings
n
Many of the screen shots in this manual are from the OneLINK BridgeAV interface, which has some
capabilities that are not available in the OneLINK Bridge Express device.

Working with the Connected Camera

The OneLINK device is not a camera control device. To operate the camera, use the camera's web
interface. You can access this from the Pairing page. Refer to the camera's documentation for details.
The connected camera is configured separately from the OneLINK device. Changes to the OneLINK
device's configuration do not affect the configuration of the camera or other connected equipment. If you
need to change the way the camera is configured, log in to the camera's web interface.

Compatible Web Browsers

We have tested this product with these web browsers:
n Chrome®
n Firefox®
Microsoft® Internet Explorer®
n
Safari®
n
We test using the browser version available from the vendor at that time. Older versions of these
browsers are likely to work, and other browsers may also work.
Complete Manual for the OneLINK Bridge Express AV Interface
11