Table of Contents
Advertisement
Parameters
6.5 "Trip class [CLASS]" parameter
6.5
"Trip class [CLASS]" parameter
"Trip class [CLASS]" parameter
The "Trip class [CLASS]" parameter is set using a rotary switch on the device.
A detailed explanation of the control elements for setting the trip class can be found in Chapter
"Setting the current (rated operational current) and trip class (Page 81)".
Note
The set trip class can be read out via IO‑Link for documentation purposes, for example. This value
cannot be set or modified via IO‑Link.
54
SIRIUS 3RB24 electronic overload relay for IO-Link
Equipment Manual, 07/2022, NEB969165602000/RS-AA/003
Advertisement
Table of Contents
