Table of Contents
Advertisement
Procedure
1. Install the block library for IO-Link
82981502).
2. Use the LIOLink_Device function block as described in the documentation.
3. An application example for using the device-specific blocks from the block library for IO-Link
(LIOLink) can be found on the Internet
view/90529409).
5.1.5.2
Replacing an IO-Link device according to the IO-Link communication specification
V1.1
Automatic saving of parameter data
If IO‑Link masters and IO‑Link devices according to the IO‑Link Kommunikations-
Spezifikation V1.1 are available, the "parameter server" function can be used to automatically
back up parameter data.
When devices are replaced, this parameter data is written back to the new IO‑Link device
automatically on system startup.
SIRIUS 3RB24 electronic overload relay for IO-Link
Equipment Manual, 07/2022, NEB969165602000/RS-AA/003
(https://support.industry.siemens.com/cs/ww/en/view/
(https://support.industry.siemens.com/cs/ww/en/
Configuring
5.1 Configuring the IO-Link
47
Advertisement
Table of Contents
