Lock Pin
Sidearm - Right
Sidearm - Left
Mounting Block (4 total)
Description
This kit includes two sidearms and mounting hardware
for the Ferno
24-MAXX
®
Tools Required
1 ea ......................................................... Electric Drill
1 ea .................................................................Hammer
1 ea .............................................. Phillips screwdriver
1 ea ........................................................ Sander or File
Parts Supplied
1 ea .................................................... Sidearm (Right)
1 ea ....................................................... Sidearm (Left)
4 ea .. Mounting Block (2 Lock Pin End, 2 Non-Pin End)
1 ea ..............................Lock Casting (1 Right, 1 Left)
4 ea ......................................................... Split Bearing
2 ea ...................................................... 1-3/8" Roll Pin
4 ea ............................ 1/4-20 x 1-3/8" Sidearm Screw
2 ea .................... 1/4-20 x 1-1/8" Lock Casting Screw
6 ea ......... 1/4-20 x 3/4" Sidearm/Lock Casting Screw
12 ea ........................................................ Lock washer
1 ea .................... Loctite
1 ea .......................................................... #25 Drill Bit
* Read cautionary information on Loctite
© Ferno-Washington, Inc.
KIT COMPONENTS (NOT TO SCALE)
Lock Pin
Cavity
Lock Castings -
Right and Left
mortuary cot.
™
242 Threadlocker Capsule*
®
®
packaging
234-3328-00 June 2005
A A A A A ccessory Kit 082-1997
ccessory Kit 082-1997
ccessory Kit 082-1997
ccessory Kit 082-1997
ccessory Kit 082-1997
24-MAXX
24-MAXX
24-MAXX
24-MAXX
24-MAXX
Split Bearing (4)
3/4" (6)
1-1/8" (2)
1-3/8" (4)
Phillips Screws
#25 Drill Bit
Read Before Beginning the Installation
•
Disinfect and clean the cot before installing the
sidearms. See the disinfecting and cleaning
instructions in the 24-MAXX Users' Manual.
•
Separate the kit components by removing the lock
washers and screws from the mounting blocks and
lock castings.
•
This kit includes left and right sidearms. Install the
sidearms with the lock pin and lock casting toward
the operator end of the cot (Figure 1). The sidearms
attach to the slots shown in Figure 1.
Loading End
Slots for Sidearm
Figure 1 - 24-MAXX Sidearm Slots
Sidearms
Sidearms
Sidearms
Sidearms
Sidearms
™ ™ ™ ™ ™
Roll Pin (2)
Lock Washer (12)
Loctite
Operator End
Lock at
this End
®
1