Table of Contents
Advertisement
Your C
n
test strip
ontour
ext
Grey Square End:
Insert this end into the test strip port
Sample Tip: Blood sample pulled in here
Check the Meter Display
Press and hold the OK button until the meter turns on,
about 3 seconds.
The screen displays the Power On Self Test.
All symbols on the screen and the white strip
port briefly light up. It is very important to verify
88 88
88 88 88
that 8.8.8 displays fully and that the white light
888
from the test strip port is visible.
If there are missing characters or if the strip
port light is a color other than white, contact
Customer Service. This may affect the way you
see your results.
6
GETTING STARTED
NOTE: Your meter comes with a pre-set time, date, and target range.
You can change these features in Settings. See Settings on page 31.
Target Ranges
The meter compares your blood sugar results with a Target Range
(for example, 70 mg/dL–130 mg/dL) to let you know if your test result is
above, in, or below your Target Range.
10 45
4 12 22
Above Your Target Range.
200
10 45
4 12 22
In Your Target Range.
100
10 45
4 12 22
Below Your Target Range.
65
You can change Target Ranges in Settings
See Settings on page 31.
C
n
GEN blood glucose monitoring system
ontour
®
ext
.
7
Hide quick links:
Advertisement
Table of Contents
