Transfer Results To The C; Transfer Results To A Personal Computer - Contour Next GEN 9658 User Manual

Disinfecting Your Meter
Supplies needed for disinfecting:
• Clorox Germicidal Wipes containing 0.55% sodium hypochlorite
(bleach).
• Paper towels.
• Timing device.
CAUTION: Do not allow cleaning solution to run into the meter
through open areas, such as around the buttons or the meter's test
strip or USB port.
1. Before disinfecting, clean the meter as described in Cleaning Your
Meter.
2. Using a new germicidal wipe, carefully wipe all outer surfaces of your
meter until wet.
NOTE: For proper disinfection, you must keep all meter surfaces wet for
60 seconds.
Buttons
3. After keeping the meter wet for 60 seconds, use a clean paper towel
to dry the meter surfaces and the test strip port.
50
Test Strip Port
Cleaning and Disinfecting Your Lancing Device
Refer to the instructions provided with your lancing device for
cleaning and disinfection.

Transfer Results to the C

CAUTION: The C n
ontour ext
use with any software other than compatible Ascensia Diabetes Care
software. The manufacturer is not responsible for any erroneous
results from the use of other software.
You can automatically transfer results from your C
meter wirelessly to your compatible smartphone or tablet. See
Download the C D
ontour iabetes
app instructions to pair your meter and get started.

Transfer Results to a Personal Computer

CAUTION: Do not attempt to perform a blood glucose test when the
C n GEN meter is connected to a computer.
ontour ext
You can transfer test results from the C
computer where they can be summarized in a report with graphs and
tables. To make use of this feature, you need diabetes management
software and a 1-meter (or 3-foot) long USB-A to Micro USB-B cable.
This type of cable is available in electronics retail stores.
C n GEN blood glucose monitoring system
ontour ® ext
HELP
D app
ontour iabetes
GEN meter has not been tested for
n
ontour ext
app on page 45 and follow the
n GEN meter to a
ontour ext
GEN
51