Troubleshooting; Interruption In Mains Supply; Servicing And Spare Parts; Disposal Of Equipment - Viessmann norpe SPIRIT User Manual

SM

4.2. Troubleshooting

If a defect occurs in the cabinet or cabinet equipment, or the cabinet does not operate normally,
check that this does not create a hazard to people or property. If necessary, disconnect the
cabinet and contact your nearest service organisation.

4.3. Interruption in mains supply

After a power cut, check that the cabinet operates normally. If necessary, contact your nearest
service organisation.

4.4. Servicing and spare parts

The specifications of the cabinet are marked on the rating plate, which is fixed to the side of the
electrical terminal box in chest cabinets and to the top lighting enclosure on the top front facing
board in upright cabinets. Please inform the authorised servicing organisation of the cabinet type,
cabinet name, cabinet serial number and the Control markings marked on the rating plate.
Only authorised fitters may carry out servicing and repair of the machinery and electrical equipment
in the cabinet.
Use only the original fittings supplied with the cabinet and the manufacturer's accessories for the
specific cabinet. For further information about fittings and accessories, please contact the supplier
of the cabinet.
NOTE
Lock-up main power switch is located in the power-pack machinery room.
NOTE Fans must be switched of during service action.

4.5. Disposal of equipment

After reaching the end of its service life, the cabinet must be disposed of in compliance with local
regulations and instructions. Seek expert advice when disposing of substances that are harmful
to the environment and when utilising recyclable material.
Version05/2015
ENGLISH
14