Auxiliary Voltage Connection - R&S ENV4200 User Manual

®
R&S ENV4200
2.2.3 Protective conductor terminal
M10 threaded bolt for connecting the R&S ENV4200 to a ground conductor in the mea-
surement area.
See

2.2.4 Auxiliary voltage connection

Device plug with line filter for connecting the auxiliary voltage to the power supply for
the fan and control logic. The R&S ENV4200 can be set for two different nominal AC
supply voltages: 115 V and 230 V.
See
User Manual 1107.2470.12 ─ 04
Chapter 4.1, "Connecting to protective
Chapter 4.5, "Connecting the auxiliary
ground", on page 17 and (3) in
voltage", on page 20 and (4) in
Instrument tour
Rear panel view
Figure 2-3.
Figure 2-3.
13