Rear Panel View - R&S ENV4200 User Manual

®
R&S ENV4200
2.1.5 Test receiver
N socket (50 Ω) for connecting to the test receiver.
See
2.1.6 Ground sockets
4 mm banana sockets to connect to the reference mass during calibration.
See (6) in
2.1.7 Protective conductor terminal
M10 threaded bolt for connecting the protective earth conductor of the equipment
under test.
See
2.1.8 Artificial hand
4 mm banana socket to connect an artificial hand to imitate the influence of the hand of
the user during measurement of the interference voltage.
See (8) in

2.2 Rear panel view

This illustration displays the rear view of the R&S ENV4200. The individual elements
are described in detail in the following sections.
User Manual 1107.2470.12 ─ 04
Chapter 4.4, "Connecting the test
Figure 2-1.
Chapter 4.1, "Connecting to protective
Figure 2-1.
receiver", on page 19 and (5) in
ground", on page 17 and (7) in
Instrument tour
Rear panel view
Figure 2-1.
Figure 2-1.
11