Operation; Configuration On Pm335J Transformer Unit; Load Remote Isolation Switch; Configuration On Monitor - Projecta IntelliJay PM300-BTJ Instruction Manual

6. OPERATION

6.1 Configuration on PM335J
Configuration of the battery type and capacity can be done through the LCD Monitor or the smart device app.

6.1.1 Load Remote Isolation Switch

This function allows for the use of a remote ISO switch to turn ON/OFF the L2-L14 outputs.
6.2 Configuration on LCD Monitor
Access to the configuration menu is safeguarded with a passcode. The default is 0000 and may be set by a user.
Passcode Descriptions
0000 Factory Default, no passcode
1999 Factory access passcode
XXXX User define
Press the 'DIM' button until the setting code is showing on the date time area which means the monitor is ready for configuration. The
'PUMP' button and 'PWR' button can be used to scroll through the configuration menu.
CODE
Table 16 Setting code of the Monitor
18
FUNCTION
Time Setting
Battery Setting
Battery Type
Battery Capacity
Battery Low Voltage Protection
Restore factory defaults
Cancel
Accept
Version
CMP
LCD
Update enable
DESCRIPTION
Set date system 12H/24H and date.
AGM / GEL / LFP (LiFePO )/WET
4
To shutdown the output of loads
Cancel to restore factory defaults
Confirm to restore factory defaults
Software version of devices. read only
Software Version of PM335J
Software Version of PMLCD-BTJ
Enable to update firmware