Table of Contents
Advertisement
10. PEQ Data Transfer of SWBOX Replacement
Before the SWBOX is replaced, please transfer the PEQ data to the new SWBOX by saving the PEQ data to the
USB drive in test mode, then please return the PEQ data to the SWBOX after the replacement.
Please refer to the "2. Summary of TransAcoustic
Saving PEQ data from SWBOX to the
USB drive
OLD SWBOX
[Start-up]
Mode
Test mode
[Testing items]
In addition to the conventional test mode for PEQ data transfer, two modes have been added.
Test No.
Sav
Saving PEQ data from SWBOX to the USB drive
Lod
Loading PEQ data from the USB drive to SWBOX
[Test mode operation procedures]
1) Start-up the test mode.
2) Push the [+/YES] or [-/NO] button to select desired testing item.
3) Push the [PLAY] button to start-up the selected testing item.
4) Execute the selected testing item according to the procedure below.
5) Push the [PLAY] button to terminate the testing item and redo step 2.
6) Turn the power off or select "t49" to terminate the test mode.
TM
Technology (Page 5)" for PEQ data.
PEQ data
Method
Panel buttons
[REC] + [PLAY] + POWER ON
Testing item
[+/YES]
[PLAY]
[-/NO]
[+/YES]
[-/NO]
[+/YES]
[-/NO]
[PLAY]
[+/YES]
[-/NO]
[+/YES]
[-/NO]
[+/YES]
- 8 -
Loading PEQ data from the USB
drive to SWBOX
NEW SWBOX
Operation
Execute the
selected testing
[PLAY]
item
Completed test
Display
Advertisement
Table of Contents
