Table of Contents
Advertisement
[Saving PEQ data from SWBOX to the USB drive]
No.
Status
①
Start-up
②
Insertion of the USB drive
③
Saving the PEQ data
④
Completed saving
⑤
Finish
[Loading PEQ data from the USB drive to SWBOX]
No.
Status
①
Start-up
②
Insertion of the USB drive
③
Loading of the PEQ data
④
Completed loading
⑤
Finish
*How to check whether there is a PEQ data of the switch box
Please execute step 3 of [Loading PEQ data from the USB drive to SWBOX].
If the "Lod" blinks on display, the PEQ data has not been saved to the SWBOX.
Refer to "Start-up"
Insert the USB drive in the USB port.
Press the [+/YES] [‐/NO] button to select "SAv"and push the [PLAY]
button to start up.
*
"SAv" blinks on display if the PEQ data has not been saved to the USB
drive.
*"InS" is displayed if the USB drive is not inserted into SWBOX,
therefore please insert the USB drive to the SWBOX.
"PAS" indicates on display when PEQ data saving is finished.
Push the [PLAY] button once to terminate the testing item.
Refer to "Start-up"
Insert the USB drive that has the PEQ data in the USB port.
Press the [+/YES] [‐/NO] button to select "Lod"and push the [PLAY]
button to start up.
*
"Lod" blinks on display if the PEQ data has not been saved to the
SWBOX.
*"InS" is displayed if the USB drive is not inserted into SWBOX,
therefore please insert the USB drive to the SWBOX.
"PAS" indicates on display when PEQ data loading is finished.
Push the [PLAY] button once to terminate the testing item.
- 9 -
Operation
Operation
Display
Display
Advertisement
Table of Contents
