Download Print this page
Lexus PG001-06 Technical Service Information Bulletin
Lexus PG001-06 Technical Service Information Bulletin

Lexus PG001-06 Technical Service Information Bulletin

Advertisement

Quick Links

Technical Service
Information Bulletin
March 30, 2006
TSIB UPDATE NOTICE:
The information contained in this TSIB supercedes TSIB No. PG009–02.
TSIB No. PG009–02 is now obsolete and should be discarded.
Introduction
A battery in a stored vehicle is subject to conditions that can reduce its performance and
life. These conditions include storage period, temperature, parasitic drain, and battery
load. Because of these factors, battery inspection and maintenance are required in order
to ensure proper operation and optimal battery life.
As a matter of policy, Lexus does not provide battery warranty coverage for discharged
and/or failed batteries due to lack of maintenance. It is the dealer's responsibility to
maintain the specified State of Charge (SOC) of the vehicle's battery while in stock and
assure proper State of Charge (SOC) at delivery.
To eliminate customer service concerns due to an undercharged battery during the first
few weeks of ownership, all dealers should check battery State of Charge (SOC) and
recharge, if necessary, just prior to delivery (i.e., within 48 hours of delivery).
Applicable
All models and model years through current.
Vehicles
Required
ITEM
SSTs
NO.
1
*
Essential SSTs.
** Refers to drawer number in SST Storage System.
NOTE:
The Digital Battery System Analyzer (P/N 00002–V8150–KIT) supercedes the
Midtronics MICROPRO 815 Digital Battery Tester (P/N 0002–MP815–T).
P/N 0002–MP815–T is now obsolete.
Additional SSTs may be ordered by calling SPX/OTC at 1-800-933-8335.
Warranty
OP CODE
Information
N/A
Lexus Supports ASE Certification
Title:
BATTERY MAINTENANCE FOR
IN-STOCK VEHICLES & PRE-DELIVERY
Models:
All Models & Model Years Through Current
SPECIAL SERVICE TOOLS (SSTs)
Digital Battery System Analyzer*
NOTE:
All components from this kit/set
are required
DESCRIPTION
Not Applicable to Warranty
PART NUMBER
QTY
00002–V8150–KIT
1
TIME
OFP
DRW**
19
T1
T2
Page 1 of 6

Advertisement

loading
Need help?

Need help?

Do you have a question about the PG001-06 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Lexus PG001-06

  • Page 1 Because of these factors, battery inspection and maintenance are required in order to ensure proper operation and optimal battery life. As a matter of policy, Lexus does not provide battery warranty coverage for discharged and/or failed batteries due to lack of maintenance. It is the dealer’s responsibility to maintain the specified State of Charge (SOC) of the vehicle’s battery while in stock and...
  • Page 2 ASE6003 Fast Battery Charger** Christie CAPPDQ ** These tools can be ordered through the Lexus Approved Dealer Equipment program by calling 1–800–368–6787. NOTE: The “Fast Battery Chargers” listed above have been tested and approved by Lexus. These state-of-the-art “smart” chargers were designed to charge batteries at an accelerated rate, without the possibility of damage.
  • Page 3 BATTERY MAINTENANCE FOR IN–STOCK VEHICLES & PRE–DELIVERY – PG001-06 March 30, 2006 Battery 4. Press the NEXT soft key Inspection (if applicable) when the HELLO Procedure screen appears to proceed to the (Continued) Main Menu. 5. Choose BATTERY TEST and press the SELECT soft key.
  • Page 4 BATTERY MAINTENANCE FOR IN–STOCK VEHICLES & PRE–DELIVERY – PG001-06 March 30, 2006 Battery 8. Proceed to the appropriate model and Inspection press the NEXT soft key. Procedure (Continued) 9. Select OEM battery type and press the NEXT soft key. 10. Choose the correct battery (model number) and press the NEXT soft key.
  • Page 5 BATTERY MAINTENANCE FOR IN–STOCK VEHICLES & PRE–DELIVERY – PG001-06 March 30, 2006 Battery 12. The battery is now being tested. The Inspection progress bar fills in across the screen Procedure while testing. (Continued) 13. Read or print the battery test results (press the PRINT soft key to print).
  • Page 6 BATTERY MAINTENANCE FOR IN–STOCK VEHICLES & PRE–DELIVERY – PG001-06 March 30, 2006 Battery 5. Battery Condition: “BAD CELL–REPLACE” Service Replace the battery. The decision indicates a bad cell within the battery. Procedure (Continued) CAUTION: If “FROZEN BATTERY” is displayed as the test result, allow the battery to reach a temperature of 40 F (4 C) before retesting.