Table of Contents
Advertisement
DECLARATION OF CONFORMITY
Application of Council Directive:
Manufacturer's Address:
Equipment Type/Environment:
Trade Name/Model No:
Standards to which Conformity is Declared:
Standard
EN61000-4-2
Electrostatic Discharge
EN61000-4-3
Radiated RF Immunity
EN61000-4-4
Electrical Fast Transient
EN61000-4-5
Surge on AC Lines
EN61000-4-6
Conducted RF on AC lines
EN61000-4-11
Voltage Dips/Interruptions
CISPR11/
RF Emissions
EN 55011
EN61000-3-2, 3-3
Harmonic, Flicker
The undersigned, hereby declares that the design of the equipment specified above conforms to the above Directive(s) and Standards
as of November 1, 2010.
USA Representative
William Foster
Vice President of Engineering
60-5242-065
2004/108/EC -The EMC Directive
2002/96/EC
73/23/EEC
Manufacturer's Name:
Teledyne Isco, Inc.
4700 Superior, Lincoln, Nebraska 68504 USA
Mailing Address: P.O. Box 82531, Lincoln, NE 68501
Laboratory Equipment for Light Industrial/Commercial Environments
330 ELSD or 340CF ELSD
Year of Issue:
2010
EN 61010-1 2
EN 61326-1:2006
Description
The WEEE Directive
The Low Voltage Directive
nd
edition
Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use
EMC Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use
Severity Applied
Level 2 - 4kV contact discharge
Level 3 - 8kV air discharge
80 MHz to 2.7Ghz 80% AM at 1kHz
Level 2 - 3V/m
Level 2 - 1kV on AC lines
Level 2 - 1kV common mode,
Level 2 - 0.5KV differential mode
150 kHz to 80 MHz,
Level 1 - 1V rms, 80% modulated
0% during half cycle
Group 1, Class A Industrial, Scientific, and
Medical Equipment
N/A
Performance Criteria
A
A
A
A
A
A
N/A
N/A
Advertisement
Table of Contents
