Target CAPRI Quick Start Manual page 2

STEP 1:
PLACE THE TABLE TOP UPSIDE DOWN ON A FLAT,SOFT SURFACE.
ALIGN HOLES IN PART (B) OVER THREADS IN PART(A).
ATTACH PART(B) TO PART(A) .USING BOLTS AS SHOWN BELOW .
DO NOT COMPLETELY TIGHTEN BOLTS AT THIS POINT
STEP 3:
FLIP TABLE OVER, ENSURE ALL LEGS ARE EVEN. ONCE EVEN, COMPLETELY
TIGHTEN ALL BOLTS AND COVER BOLT HEADS WITH CAP(F).
BE CAREFUL NOT TO OVERTIGHTEN AS THIS MAY DAMAGE THREADS.
.
STEP 2:
ALIGN HOLES IN PART(C) WITH THREADS IN PART(B).
ATTACH PART(C ) TO PART(B).USING BOLTS AS SHOWN BELOW .
DO NOT COMPLETELY TIGHETEN BOLTS AT THIS POINT
STEP 4:
YOUR TABLE IS NOW READY FOR USE.
FINISH
2