Charging The Battery Pack - Sony DCR-TRV19 Operating Instructions Manual

Step 1 Preparing the power source

Charging the battery pack

Use the battery pack after charging it for your camcorder.
Your camcorder operates only with the "InfoLITHIUM" battery pack (M series) .
See page 200 for details of "InfoLITHIUM" battery pack.
(1) Install the battery pack on your camcorder.
(2) Connect the AC Adaptor supplied with your camcorder to the DC IN jack with
the v mark on the DC plug facing the battery.
(3) Connect the power cord to the AC Adaptor.
(4) Connect the power cord to a wall outlet.
(5) Set the POWER switch to OFF (CHG).
The CHG lamp lights up when charging begins. After charging is completed,
the CHG lamp goes out (full charge).
1
CHG lamp
After charging the battery pack
Disconnect the AC Adaptor from the DC IN jack on your camcorder.
2
5
POWER
VCR
OFF ( CHG )
CAMERA
MEMORY
3
17