Table of Contents
Advertisement
1. SPECIFICATION
Motor Power: 1.1kw (approx)
Power Supply: 230V / 50Hz
Max. Wheel Diameter: 45" (1140mm)
Max. Wheel Width: 14" ( 355mm)
Rim Clamping Form Outside: 12" - 23"( 300 - 580mm)
Rim Clamping Form Inside : 14" - 26"( 355 - 660mm)
Operating Pressure: 8-10 bar (approx)
Bead-Breaker Force: 2500kg
Noise Level: <70dB
Bead breaker force：14000 N
2000 mm (H) x 1050mm(D) x 1100 mm(W)
Dimensions:
Working temperature：-40℃－45℃
Transport/store temperature：-40℃－55℃
Humidity：30－95%
2. SAFETY INFORMATION
Read the instruction manual fully. Do not attempt any operation until you have read and
understood this manual. Most important you must know how to safely start and stop this
machine,especially in an emergency.
Keep the work area tidy and clean. Attempting to clear clutter from around the machine
during use will reduce your concentration. Mess on the floor creates a trip hazard. Any liquid
spilt on the floor could result in you slipping.
Find a suitable location. The location should provide good natural light or artificial lighting as
are placement. Avoid damp and dusty locations as it will have a negative effect on the
machine's performance.
Do not expose the machine to rain or any direct or indirect water spray. In all cases do not
operate power tools near any flammable materials.
Beware of electric shock. Avoid contact with earthed surfaces; because they can conduct
electricity if there is an electrical fault with the machine. Always protect the power cable and
route it away from danger.
Keep bystanders away. Children, onlookers and passers by must be restricted from entering
the work area for their own protection.The barrier must extend a suitable distance from the tool
user.
Do not overload or misuse the machine. All machines are designed for a purpose and are
limited to what they are capable of doing. Do not attempt to use the machine (or adapt it in
Advertisement
Table of Contents
