Table of Contents
Advertisement
• Repeat the above steps on other part of the tire
to get the tire separated thoroughly from the rim.
• Bead breaker can be adjustable for different
width tire, pull out handle Z and let the moveable
part go to its right position, then insert handle Z back.
NOTE：When using the bead breaking arm, do
not put arms and hands between the tire and the
Fig.15
bead breaker.
• Press switch handle button N (Fig. 16), fix arm.
Fig.16
• Press pedal A, tilt the column.
• Depress pedal B, Place the wheel on the turntable,
and lock rim（Fig. 17）.
NOTE：Different types of clamping can be chosen
in accordance with different rims.
• In case of inward clamping, shrink the jaws together,
place the wheel on the turntable and depress pedal B
to clamp (Fig.18-a).
• In case of outward clamping, enlarge the jaws outward
(2-3cm away from periphery of the rim) and place the
wheel on the turntable. And depress pedal B to clamp
it(as fig.18-b）.
Fig.18
Fig.17
• Press pedal A (Fig.16), let column back to its working position, pull back switch handle N (Fig.
19-a), let the arm L and hex column M move freely. Push N and press M, make mounting head
O against rim (Fig. 19-b), press switch handle N lock arm and hex column. Make sure
mounting head keep a distance of 1~2mm from upper edge of rim and 2mm from outer edge
Advertisement
Table of Contents
