Epson WF-2960 User Manual page 244

1. Turn off the product using the
2. Wait for the power light to go out, then unplug the power cable.
Caution: Wait until the power light turns off before you unplug the power cable to allow the print
head to return to the home (far right) position. If the print head does not return to the home position,
the ink can dry out and your product can be damaged.
3. Disconnect any connected cables.
4. Remove all the paper from the product and make sure there are no originals on the scanner glass.
5. Make sure the document cover is closed and then lift up the scanner unit until it locks into place.
Caution: Be careful not to trap your hand or fingers when opening or closing the scanner unit.
power button.
244