Checking The Nozzles Using A Computer Utility - Epson WF-2960 User Manual

Print head needs Power Cleaning
6. Do one of the following:
• If there are no gaps, select O.
• If there are gaps or the pattern is faint, select X and continue. Follow the instructions on the screen
to clean the print head.
• If most lines are missing or not printed, most of the nozzles are clogged. Select O and then run a
Power Cleaning. See the link below.
7. Follow the instructions on the screen to clean the print head, check the nozzles, and repeat the
process as necessary.
Caution: Never turn off the product or open the scanner unit during a cleaning cycle or you may not
be able to print.
If you don't see any improvement after cleaning the print head up to 3 times, turn the product off using
the power button and wait at least 12 hours. Then run a nozzle check and try cleaning the print head
again, if necessary. If quality still does not improve, run a Power Cleaning.
Parent topic:
Related tasks
Cleaning the Print Head Using the Product Control Panel
Power Cleaning Using the Product Control Panel
Related topics
Loading Paper

Checking the Nozzles Using a Computer Utility

You can check the print head nozzles using a utility on your Windows or Mac computer.
Print Head Nozzle Check
218