Figure 15. Ethernet Properties - Manual Dns Server Settings; Figure 16. Hotspot And Tethering - Siemens VersiCharge AC User Manual

• Click on the Use the following DNS Server IP address radio button to manually enter the DNS server address.
Figure 15. Ethernet Properties – Manual DNS Server settings
5.
Enable Share internet with other chargers and set the authentication information if you wish to share
the internet connection of this charger with other chargers. This applies only if you have selected Dynamic.
NOTE: Sharing the internet connection with other chargers is only possible from Wi-Fi (the charger acts as a hotspot).
When you enable Share Internet, the verification method to verify the commissioning status of the charger is changed
to Verify Now.

Figure 16. Hotspot and Tethering

6.
Select RFID Authorization from the configuration pane to configure the authentication preferences.
For more information, see
7.
Click Send Configuration to send the configuration information to charger.
For more information, see
8.
Click Save Configuration to save the current configuration onto your computer's local drive.
For more information, see
3.6 Enable or Disable RFID Authorization.
3.7 Commission the Charger.
3.8 Save Charger Configuration.
User Manual VersiCharge™ AC Configuration Tool
13