Cooling System - Shindaiwa EB633RT Operator's Manual

MAINTENANCE

Cooling System

Level 2.
To maintain proper engine operating temperatures, cooling air must
pass freely through the cylinder fin area. This flow of air carries
combustion heat away from the engine.
Overheating and engine seizure can
occur when:
• Air intakes are blocked,
preventing cooling air from
reaching the cylinder.
• Dust and grass build up on the
outside of the cylinder. This build
up insulates the engine and
prevents the heat from leaving.
Removal of cooling passage blockages or cleaning of cooling fins is
considered "Normal Maintenance." Any failure attributed to lack of
maintenance is not warranted.
Cleaning Grill
1. Brush accumulated debris from intake grill between backpack frame
and blower housing.
Cleaning Cylinder Fins
1. Disconnect spark plug lead
from spark plug, and remove
engine cover.
2. Clean cylinder fins (A) to allow
cooling air to pass freely.
3. Install engine cover and attach
spark plug lead.
30
EB633RT
A
X7531124908
© 04/22 ECHO Incorporated