Stopping Engine; Operating Blower - Shindaiwa EB633RT Operator's Manual

OPERATION

Stopping Engine

1.
Throttle Position / Throttle
Position Lever
Release throttle trigger (C).
Move Throttle Position Lever (A)
forward to IDLE position and
allow engine to return to idle
before shutting off engine.
2.
Stop Switch Button
Slide stop switch (B) to STOP
position.
If engine does not stop when stop switch is moved to STOP
position, close choke - COLD START position - to stall
engine. Have your Shindaiwa dealer repair stop switch before
using unit again.

Operating Blower

Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a
poison gas. Breathing CO can cause unconsciousness, serious
injury, or death. Exhaust can cause serious burns. ALWAYS
position unit so that exhaust is directed away from your face
and body.
Always wear safety glasses, hearing protection and a face filter
mask or serious personal injury may result. Do not point the
blower pipe in the direction of people or pets.
24
B
A
C
© 04/22 ECHO Incorporated
EB633RT
X7531124908