Symbols On The Scooter; Transport - Vermeiren One User Manual

In case a serious incident has occurred involving your product, notify Vermeiren or your specialist
dealer as well as the competent authority in your country.
2.3

Symbols on the scooter

The symbols in following list are applicable for your scooter. Missing symbols can be found in the
relevant ISO standard (ISO 7000, ISO 7001 and IEC 417).
2.4

Transport

2.4.1 Moving the scooter
The best way to carry the scooter is to make use of the neutral mode. Place the scooter in neutral
and roll the scooter to the desired place.
If this is not possible, you can carry the scooter according to the following steps:
1. Switch the scooter off.
2. Remove loose parts (seat and batteries).
3. Store loose parts in a safe place.
4. Carry the frame + steering unit with 2 persons to the desired place. Hold the frame to the
chassis or fixed parts of the frame, not the bumpers or the plastic parts.
2.4.2 Transport in the car
WARNING
• Do NOT use your scooter as seat in a vehicle, see the following symbol. The best
way to transport your scooter is to disassemble and lift it (with help) in the vehicle.
Secure the scooter to the vehicle to make sure that it won't move during cornering
and that it won't be launched during sudden full braking.
• Remove all loose parts prior to transportation.
• No people or objects should be under the scooter, on the footplate or seat during transportation.
• Do not place fingers between the components of the scooter.
The best way to transport your scooter in the car is to drive the scooter in the car using ramps.
When you are not experienced to drive the scooter using ramps, you can also put the scooter in
neutral mode and push the scooter in the car using ramps.
Maximum weight of the user
Indoor use
Maximum safe slope in °
Maximum speed
Type designation
Risk of entrapment
Risk of severe injuries
5
EN
One
2022-09
Before use
NL