Items Supplied - MAXXMEE Crunch-Trainer User Manual

EN
Dear Customer,
We are delighted that you have chosen the MAXXMEE Crunch-Trainer. This home
trainer allows you to combine a workout for lots of different muscle groups in just one
device. Simply sit on the seat, place your feet on and pull on the handle. Your own
weight acts as counterweight. Depending on your gripping technique, this allows
you to effectively stretch different muscle groups. Grip from below if you particularly
want to focus on your biceps. Grip from above if you want to strengthen your pectoral
muscles. And if you want to train your deltoid muscle and back, grip the handles at the
side. With all different versions, your legs, buttocks and abdominal muscles will also be
trained. The training time and estimated calorie consumption can also be read on the
digital display.
If you have any questions about the device and about spare parts/accessories, contact
the customer service department via our website: www.dspro.de/kundenservice
We hope you have a lot of fun with your MAXXMEE Crunch-Trainer.
Information About the Operating Instructions
Before using the device for the first time, please read through these operating in-
structions carefully and keep them for future reference and other users. They form an
integral part of the device. The manufacturer and importer do not accept any liability if
the information in these operating instructions is not complied with.

ITEMS SUPPLIED

(Featured in Picture I)
1 x main frame (1)
1 x seat frame (2) with wheel frame (3) and
support rod (7)
1 x connecting rod (4)
1 x handlebar (5)
1 x foot support (6)
1 x seat (8)
1 x training computer (9)
2 x spring (A15)
1 x operating instructions
Fixings:
1 x screw M10 x 90 (A2)
1 x screw M10 x 120 (A3)
4 x screw M6 x 50 (A4)
2 x screw M8 x 30 (A5),
4 x screw M8 x 12 (A7)
1 x bolt Ø 8 x 45 (A8)
2 x locking nut M10 (A9)
2 x locking nut M8 (A10)
12
08284_Inlay_de-en-fr-nl_A5_V1.indb 12 08284_Inlay_de-en-fr-nl_A5_V1.indb 12
2 x flat washer Ø 10 (A11)
2 x flat washer Ø 8 (A12)
4 x curved washer Ø 6 (A13)
4 x curved washer Ø 8 (A16)
Tools:
1 x spanner
1 x hex key
1 x hex key with cross-head screwdriver
L
For the training computer, an AA
battery, 1.5 V is also required.
Check the items supplied for complete-
ness and the components for transport
damage. If you find any damage, do not
use the device but contact our customer
service department.
Remove any possible films, stickers or
transport protection from the device.
Never remove the rating plate and any
possible warnings!
09.06.2021 14:44:14 09.06.2021 14:44:14