Summary of Contents for Amart Furniture LIVERPOOL 66911
Page 1
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia. For any assistance with assembly or for missing parts please phone Amart Furniture, Customer Service Free call 1800 351 084 Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia. For any assistance with assembly or for missing parts please phone Amart...
Page 2
PRE-ASSEMBLY PREPARATION BEFORE YOU START… 1. CHOOSE A CLEAN, LEVEL, SPACIOUS ASSEMBLY AREA. AVOID HARD SURFACES THAT MAY DAMAGE THE PRODUCT. 2. TAKE CARE WHEN LIFTING. PRODUCT SHOULD BE ASSEMBLED AS NEAR AS POSSIBLE TO THE POINT OF USE. 3. CHECK AND ENSURE THAT YOU HAVE ALL THE REQUIRED CONTENTS FOR COMPLETE ASSEMBLY. 4.
Page 3
PARTS LIST Hardware List (Pack 1) Hardware List (Pack 2) Hardware List (Pack 3) Hardware List (Pack 4) PLEASE TAKE NOTE: PIECES REQUIRE FOR ASSEMBLY ARE LOCATED INSIDE THE DUST COVER UNDERNEATH SOFA PAGE 3 OF 6 66911...
Page 4
LIFT THE ITEM WITH 2 PEOPLE CAREFULLY TURN OVER ONTO BLANKET OR CARPET TO ENSURE NO DAMAGE TO ITEM. DETAILS (1) - Align base plate of each foot (B) with the pre-threaded holes in the undersides of Step 1 the sofa as shown in the below diagram. Insert Bolt (F) and tighten by turning clockwise using Allen key (D) DETAILS (2) - Align base plate of each foot (E) with the pre-threaded holes in the undersides of the sofa as shown in the below diagram.
Page 5
ASSEMBLY COMPLETED IMPORTANT: PLEASE ENSURE FEET ARE TIGHTENED SECURELY BEFORE USE! WARNING - Do not drag lounge on any surface due to timber base, must be lifted. Two Person Lift Recommended PAGE 5 OF 6 66911...
Page 6
CARE AND MAINTENANCE LEATHER CARE (FRAME) WHEN NECESSARY BRUSH OR VACUUM AWAY DUST AND GRIT. WIPE OVER WITH A SOFT, CLEAN, DYEFAST CLOTH. FOR SPOTS AND SPILLS: WIPE EXCESS LIQUID UP IMMEDIATELY WITH AN ABSORBANT CLOTH OR SPONGE. FOR OVERALL CLEANING: WE RECOMMEND CLEANING EVERY 3-4 MONTHS WITH ∙...
Need help?
Do you have a question about the LIVERPOOL 66911 and is the answer not in the manual?
Questions and answers