Specifications; Table 3: Model Overview; Table 4: Trigger And Timing - Tektronix PSPL2600C User Manual

Specifications

Table 3: Model overview

Parameter
Amplitude range into 50 Ω 1
Transition time, leading edge (10 – 90)
Transition time, trailing edge (10 – 90%)
Topline overshoot
Attenuation
Polarity
Baseline
Reflection coefficient
Source impedance (nominal)
Duration (FWHM)
Baseline precursor
Topline perturbations
Spurious pulse at 115 ns
1
Parameters listed are for positive polarity pulse. Negative polarity pulse amplitude is typically 1 dB less and the rise times and fall times are typically 75 ps slower.

Table 4: Trigger and timing

Parameter
Adjustable delay
Adjustable delay jitter, RMS
Fixed trigger delay
Fixed trigger delay jitter, RMS
Repetition rate
External trigger input level
External trigger impedance
Trigger output into 50 Ω
Trigger in/out delay
Tektronix PSPL2600C Pulse Generator User Manual
Specifications listed in this manual are those which applied at the time of printing.
Tektronix reserves the right to change specifications at any time without notice
and without incurring any obligation to incorporate new features in products
previously sold. Tektronix also reserves the right to discontinue products at any
time without notice.
NOTE. The performance parameters listed in the following tables are typical
values, parameters are guaranteed at 23 °C (±3 °C) when maximum and/or
minimum limits are given.
PSPL2600C
14 mV to 45 V, ≥40 V min.
1 400 ps, ≤500 ps max
1 1 ns, ≤1.8 ns max.
≤2%
0 to 70 dB, 1 dB steps
Positive or negative
0 V
-30% during pulse, +50% after pulse. Improves with increasing attenuation
50 Ω
< 1 ns to 100 ns, continuously adjustable
< ±2%
< ±2%
+6% with duration ≤ 20 ns, +30% for pulse duration = 100 ns
PSPL2600C-TURBO
16 mV to 50 V, ≥45 V min.
250 ps, ≤ 350 ps max.
800 ps, ≤1 ns max.
< 4%
Value
0 to 100 ns
≤35 ps
115 ns
≤12 ps
1 Hz to 100 kHz continuously adjustable
TTL pulse required, level > 1.5 V, + slope, > 10 ns duration
430 Ω
0.8 V
200 ns
13